Child pages
  • PHI 5600: COOLING SYSTEM
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

PHI 5600: COOLING SYSTEM

Description of cooling system,

  • Heat Exchange system circulates water through both sources and it has a radiator to cool down the water. 
  • Besides the water reservoir it has a water filter and a de-ionizer cartridge which operates continuously. 
  • There is electronic control of the pump from the X-ray Source Controller, (see pictures for position of cable for pump control, the cable is labelled A179J5 and A179). When turned on one should look for the direction of the flow to make sure it is correct.
  • The Heath Exchange System has a flow switch controlled by the X-ray Source Control to prevent the X-ray source from turning on if there is now flow of water (without cooling the anode would burn very quickly)
  • Uses distilled water (3 gallons)
  • The direction of flow is shown in the pictures.
  • It gets connected to 208V power strip.
  • A description of the production of x-rays is shown in the video.

 

 

      

CONTACT: Jorge A. López (jorgelopez@utep.edu)

  • No labels